[NTLK] MP2100 Internals--Original Location of Spacing

[Gene beaird]

A dab of white glue to hold it in place while you assemble?  Set it where you want it, holding it in some sort of jig, or with tape until the glue sets.  It will hold for a while after assembly, but won’t be permanent.  If the piece _has_ to float after assembly, then maybe not. 

Regards,

Gene Beaird,
Pearland, Texas



> On Oct 4, 2026, at 2:00 PM, newtontalk-request at newtontalk.net wrote:
> 
> Message: 2
> Date: Sat, 03 Oct 2026 17:50:32 -0700
> From: apenultimate <apenultimate at fastmail.com>
> To: newtontalk at newtontalk.net
> Cc: apenultimate <apenultimate at fastmail.com>
> Subject: [NTLK] MP2100 Internals--Original Location of Spacing
> Piece--Follow Up
> Message-ID: <7d25260b-3b17-4932-9efd-30c3d7d45f4f at app.fastmail.com>
> Content-Type: text/plain
> 
> I may have answered my own question looking at it one more time . . . there seems to be an open space (sort of a notch) of equal length in the back cover, and I'm guessing that's where it sits.  Gonna be tricky to hold together when putting the back cover on, but it seems likely that's where it goes.
> 
> Idomeneus