[NTLK] Newton Connection 2.0 Crashing Under Classic Mac OS 9.2.1 on PowerMac G4

[Woody Smith]

I’m not sure if this is helpful but NCU needs to be open before you connect with Newton. 

Woody

Sent from my iPhone

> On May 24, 2021, at 6:30 AM, Alan Grassia <alan.grassia at gmail.com> wrote:
> 
> Thanks, Matej.
> 
> I may have gotten NCK and NCU mixed up when I downloaded the files from UNNA.org.
> 
> My serial to USB adapter was purchased from eBay and listed as being in working condition. Cosmetically, the Keyspan USA-28 adapter is in great condition. My Newtons and eMate are the only Mini DIN 8 serial devices that I have. I’ll have to see if I can test the adapter to verify it is actually working too.
> 
> Cheers,
> Alan Grassia
> 
> -------------------------------
> MessagePad 2000, MessagePad 2100, eMate 300
> 
> Sent from my Apple iPhone 12 Pro Max
> 
>> On May 24, 2021, at 1:31 AM, Matej Horvat <matej.horvat at guest.arnes.si> wrote:
>> 
>> It might be crashing because it can't find a serial port. Try connecting a serial-to-USB adapter for which you have an extension installed.
>> 
>> Newton Connection (a.k.a. Newton Connection Kit) is only for OS 1.x devices though; you need Newton Connection _Utilities_ for OS 2.x.
>> ----------------------------------------------------------------------
>> 
>> http://newtontalk.net
>> http://twitter.com/newtontalk
> ----------------------------------------------------------------------
> 
> http://newtontalk.net
> http://twitter.com/newtontalk