[NTLK] eMate 300 Just Died???

[arceeHS]

I didn't mean to be redundant. It is just that Michael is faster than I am.

On Fri, Apr 23, 2021 at 5:25 PM arceeHS <arceehs at gmail.com> wrote:

> 1. Unplug the eMate from the AC adapter. Unplug the AC adapter from power.
> Disconnect the battery inside the eMate.
> 2. Let the eMate sit unpowered for 24 hours. You may push the reset button
> on the back as many times as you like.
> 3. Plug the AC adapter into power. Plug the AC adapter into the eMate.
> 4. Turn on the eMate and breathe thankful sighs of relief when it starts
> up and as you go thru' the screen setup procedure.
>
> On Fri, Apr 23, 2021 at 4:39 PM Jim C. <guardsix6 at gmail.com> wrote:
>
>> Help!  My eMate 300 just died!  I’ve had it on my desk for several days
>> turned off with it plugged in. I tried to turn it on today and I get
>> nothing!  The power cord is plugged in. I tested the outlet and it’s
>> sending power. I’ve did the two seconds reset and then the 15 second reset
>> and still nothing.
>>
>> I don’t have a power light indicator of any kind.  I just don’t know
>> what’s gone wrong. It was working fine just two days ago.
>>
>> Anyone want to venture a guess as to how I can get it back to working?
>>
>> Thanks!
>>
>>
>> Jim Chapman
>> Guardsix6 at gmail.com <mailto:guardsix6 at gmail.com>
>>
>>
>>
>> ----------------------------------------------------------------------
>>
>> http://newtontalk.net
>> http://twitter.com/newtontalk
>
>