[NTLK] Correct NPDS settings ?

[Sylvain]

The /trac/ page is just a page that redirects to the address of the tracker to which your NPDS-Tracker module is connected, to access other Newtons-NPDS.

However, you must of course set your port to 3443 in the NPDS-Setup module, in the [Security] tab. Take a look at mine:
http://messagepad.no-ip.org:2200/html/screen.html

(I'll leave it open for a few moments so you can see it).

Because right now, when we go through a tracker (http://tracker.applenewton.co.uk:3680/), we don't end up on your Newton server, but on your other server (which isn't a Newton).


Best ;-)

Sylvain P.
NPDS Tracker : http://messagepad.no-ip.org:3680/ <http://messagepad.no-ip.org:3680/>

> Le 4 janv. 2026 à 19:35, Tom <falken at falkensweb.com> a écrit :
> 
> On 2026-01-04 18:33, Sylvain wrote:
>> And we can access your Newton-NPDS server at this address:
>> http://newton.falkensweb.com:3443/html/index.html
>> Port 3680 is exclusively for communication between TRACKER-SERVERS and [NPDS Tracker] modules on your MP;
> 
> Ah *ha* !
> 
> So "HTTP port" is to help make the '/traq/' page work, and 'Newton Port' is the port to talk to the tracker itself on or something like that ?
> 
> Setting both to 3680 as suggested has stopped the error slips appearing *and* I'm now listed on the NPDS tracker sites :)
> 
> Thanks,
> Tom
> ----------------------------------------------------------------------
> 
> https://newtontalk.net
> https://bitbang.social/@newtontalk
> https://twitter.com/newtontalk