[NTLK] eMate death question

L.W. Brown lwb at mac.com
Mon Apr 26 14:41:31 PDT 2021


i did it myself once w/out realizing it - caused a lot of upset til someone here set me right!

Sent from ProPad

> On Apr 26, 2021, at 2:08 PM, Peter Fraser <pjfraser at mac.com> wrote:
> 
> This might be a dumb comment, but I remember that sometimes folks would inadvertently move the brightness or contrast slider to a position where the screen was dark, and think that the whole thing was dead. 
> 
> Sent from my iPhone
> 
> -- Peter
> pjfraser at mac.com
> 
>> On Apr 26, 2021, at 1:59 PM, L.W. Brown via NewtonTalk <newtontalk at newtontalk.net> wrote:
>> 
>> my recollection is it needs quite a few hours “rest” - if memory serves: at least 4, but better overnight
>> 
>> Sent from ProPad
>> 
>>>> On Apr 26, 2021, at 10:30 AM, Jim Chapman <guardsix6 at gmail.com> wrote:
>>> 
>>> 
>>> Disaster!!!
>>> 
>>>>>> 
>>> ​My eMate 300 still won't come on. Shows no signs of life? And it was so new!!!!
>>> 
>>>>>> 
>>> ​I tried all the steps below and still nothing. The battery has been plugged back in for over an hour. I've tried to do a short reset and a long reset, still nothing happens. I even did the hard recovery, but I get nothing on the screen.
>>> 
>>>>>> 
>>> ​Anybody want to try and fix this before I just put it away forever?
>>> 
>>>>>> 
>>> ​Desparate!
>>> 
>>>>>> 
>>> ​Jim Chapman
>>> 
>>>guardsix6 at gmail.com
>>> 
>>>>>> 
>>>>>> 
>>>>> On Apr 23 2021, at 6:22 pm, newtontalk-request at newtontalk.net wrote:
>>>> 
>>>> 
>>>>   4. eMate 300 Just Died??? (Jim C.)
>>>> 
>>>> -----------------------------
>>>> 
>>>> Message: 4
>>>> Date: Fri, 23 Apr 2021 15:39:03 -0500
>>>> From: "Jim C."  <guardsix6 at gmail.com>
>>>> To: newtontalk at newtontalk.net
>>>> Subject: [NTLK] eMate 300 Just Died???
>>>> Message-ID:  <A9BC062D-16D2-4C1E-8924-C48E12A68C13 at gmail.com>
>>>> Content-Type: text/plain;        charset=utf-8
>>>> 
>>>> Help!    My eMate 300 just died!    I?ve had it on my desk for several days turned off with it plugged in. I tried to turn it on today and I get nothing!    The power cord is plugged in. I tested the outlet and it?s sending power. I?ve did the two seconds reset and then the 15 second reset and still nothing.
>>>> 
>>>> I don?t have a power light indicator of any kind.    I just don?t know what?s gone wrong. It was working fine just two days ago.
>>>> 
>>>> Anyone want to venture a guess as to how I can get it back to working?
>>>> 
>>>> Thanks!
>>>> 
>>>> 
>>>> Jim Chapman
>>>> Guardsix6 at gmail.com  <mailto:guardsix6 at gmail.com>
>>>> ----------------------------
>>>> 
>>>> Message: 5
>>>> Date: Fri, 23 Apr 2021 17:13:15 -0400
>>>> From: Michael Sheflin  <sheflinm at gmail.com>
>>>> To: NewtonTalk Mailin List  <newtontalk at newtontalk.net>
>>>> Subject: Re: [NTLK] eMate 300 Just Died???
>>>> Message-ID:
>>>>        <CAKUGNUX-2eVKTmW04bJ7x_uSiprqB1CYaN-pxRvW4=OZAKxXkg at mail.gmail.com>
>>>> Content-Type: text/plain; charset="UTF-8"
>>>> 
>>>> Unplug it, drain the battery if possible (or disconnect it).    "Turn it on"
>>>> a few times to drain the capacitors.      Then plug it back in and try to turn
>>>> it on.
>>>> 
>>>> Does anything different happen?
>>>> ------------------------------
>>>> 
>>>> Message: 6
>>>> Date: Fri, 23 Apr 2021 17:13:45 -0400
>>>> From: Michael Sheflin  <sheflinm at gmail.com>
>>>> To: NewtonTalk Mailin List  <newtontalk at newtontalk.net>
>>>> Subject: Re: [NTLK] eMate 300 Just Died???
>>>> Message-ID:
>>>>        <CAKUGNUXKNphjxQLcFvkWTizSRn7nSjZzVSC4vDE_dStv722weQ at mail.gmail.com>
>>>> Content-Type: text/plain; charset="UTF-8"
>>>> 
>>>> If the answer is yes, I'd suggest not leaving it plugged in and see if the
>>>> problem recurs.
>>>> 
>>>>> On Fri, Apr 23, 2021, 5:13 PM Michael Sheflin  <sheflinm at gmail.com>  wrote:
>>>>> 
>>>>> Unplug it, drain the battery if possible (or disconnect it).    "Turn it on"
>>>>> a few times to drain the capacitors.      Then plug it back in and try to turn
>>>>> it on.
>>>>> 
>>>>> Does anything different happen?
>>>>> 
>>>>> 
>>>> 
>>>> 
>>>> 
>>>> ------------------------------
>>>> 
>>>> Message: 8
>>>> Date: Fri, 23 Apr 2021 17:25:27 -0400
>>>> From: arceeHS  <arceehs at gmail.com>
>>>> To: newtontalk at newtontalk.net
>>>> Subject: Re: [NTLK] eMate 300 Just Died???
>>>> Message-ID:
>>>>        <CAPC=-CHp=H2aAQqXYX7T9xYFvw6pB5-ZQuPZcqGGv_AdThMHxQ at mail.gmail.com>
>>>> Content-Type: text/plain; charset="UTF-8"
>>>> 
>>>> 1. Unplug the eMate from the AC adapter. Unplug the AC adapter from power.
>>>> Disconnect the battery inside the eMate.
>>>> 2. Let the eMate sit unpowered for 24 hours. You may push the reset button
>>>> on the back as many times as you like.
>>>> 3. Plug the AC adapter into power. Plug the AC adapter into the eMate.
>>>> 4. Turn on the eMate and breathe thankful sighs of relief when it starts up
>>>> and as you go thru' the screen setup procedure.
>>>> 
>>>> ------------------------------
>>>> 
>>>> Message: 9
>>>> Date: Fri, 23 Apr 2021 17:28:36 -0400
>>>> From: arceeHS  <arceehs at gmail.com>
>>>> To: newtontalk at newtontalk.net
>>>> Subject: Re: [NTLK] eMate 300 Just Died???
>>>> Message-ID:
>>>>        <CAPC=-CEE_A8AVOuDeocsLOVceU45tRdxjWjufVPOiWNZ0YXA+g at mail.gmail.com>
>>>> Content-Type: text/plain; charset="UTF-8"
>>>> 
>>>> I didn't mean to be redundant. It is just that Michael is faster than I am.
>>>> 
>>>>> On Fri, Apr 23, 2021 at 5:25 PM arceeHS  <arceehs at gmail.com>  wrote:
>>>>> 
>>>>> 1. Unplug the eMate from the AC adapter. Unplug the AC adapter from power.
>>>>> Disconnect the battery inside the eMate.
>>>>> 2. Let the eMate sit unpowered for 24 hours. You may push the reset button
>>>>> on the back as many times as you like.
>>>>> 3. Plug the AC adapter into power. Plug the AC adapter into the eMate.
>>>>> 4. Turn on the eMate and breathe thankful sighs of relief when it starts
>>>>> up and as you go thru' the screen setup procedure.
>>>>> 
>>>> 
>>>> ------------------------------
>>>> 
>>> ----------------------------------------------------------------------
>>> 
>>> http://newtontalk.net
>>> http://twitter.com/newtontalk
>> ----------------------------------------------------------------------
>> 
>> http://newtontalk.net
>> http://twitter.com/newtontalk


More information about the NewtonTalk mailing list