[NTLK] Component needed for Apple Fax Bluetooth Project

Artur artur.krajewski.me at gmail.com
Sat Aug 1 03:48:08 EDT 2020


Hello Mark,

sorry for late answer but it was hard week for me.

In my case Ground is Yellow :) My wires are connected to MAX2323 module like this:

———|
—> | green
<— | orange
 + | 
 - | yellow
———|

black, violet and brown are not used.

Here you can find photos of my prototype:
https://1drv.ms/f/s!AkZd9o8beIALi74IttYCrxK0ONhu-A

Best regards

Artur


> Wiadomość napisana przez Mark Kuberski <berskyboy at gmail.com> w dniu 28.07.2020, o godz. 04:29:
> 
> Hi Artur,
> 
> I’m at the last step!!! Can you tell me what colours are the pins for:
> 
> Ground - Pin 4
> Transmitted Data - Pin 3
> Received Data - Pin 5
> 
> On the Apple Newton Fax side (like the 6 connectors are Black, Brown, Orange, Brown, Green, Yellow)
> 
> I’m making the assumption that Black is ground, and green is Receive, and yellow is Send????
> 
> Thanks,
> Mark
>> Hi Mark,
>> 
>> Yes, those step-up module you have and step-down you ordered are exactly what you need :)
>> 
>> Best regards
>> 
>> Artur
> 
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk



More information about the NewtonTalk mailing list