[NTLK] Flash (or compact flash) for emate

Woody Smith woodysmith at me.com
Fri Oct 31 20:18:43 EDT 2014


You will not have difficulty in finding these on eBay, but they tend to be pricy.

The AMD series D is completely it is a 5v linear flash that is 8 mg and works flawlessly in the eMate, as a linear flash does in any other newton except that this one is 5v.
You can save to it and  back up to it without additional software. It will also function in the 2x00 series newtons.

.
> On Oct 31, 2014, at 7:10 PM, Woody Smith <woodysmith at me.com> wrote:
> 
> Yes.
> 
> 
>> On Oct 31, 2014, at 11:13 AM, Stephen Hankins <ghankins at mac.com> wrote:
>> 
>> Thanks, Woody. I think I may give the CF adaptor a shot, just for the heck of it. But I will keep your 5v card in mind. Do you know that an eMate will write to it? What is it's capacity? I'm mostly interested in using the card for a backup, since my NCU serial connection seems sometimes flakey.
>> 
>> Thanks!
>> 
>> Greg
>> 
>> _________________________
>> Greg Hankins
>> ghankins at mac.com
>> Mt. Gilead, NC
>> 
>>> On Oct 30, 2014, at 11:07 PM, Woody Smith <woodysmith at me.com> wrote:
>>> 
>>> I have an AMD series D 5v linear flash card I would sell for $30, contact me off list with offer.
>>> The compact flash will also work, the ATA driver is available and works pretty well.
>>> 
>>> Woody
>>> 
>>>> On Oct 30, 2014, at 9:26 PM, Stephen Hankins <ghankins at mac.com> wrote:
>>>> 
>>>> Hi All!
>>>> 
>>>> I would like to get a storage card for my eMate. I have several for my MP2100, but the eMate doesn't like any of them, I asusme because they are all 12v instead of 5v.
>>>> 
>>>> But the number of cards out there is a bit bewildering, the prices high, and the specifications sketchy. I wonder if anyone can recommend something in the 4-32MB range that will work with an eMate?
>>>> 
>>>> Alternatively, I have a couple of unused CompactFlash cards lying around from an old, dead camera. So I could buy one of those PCMCIA CF adaptors. Any recommendations on which of these for the eMate? I gather that one needs Paul Guyot's ATA drivers for this to work?
>>>> 
>>>> Cheers!
>>>> 
>>>> Greg
>>>> ____________________________
>>>> Greg Hankins
>>>> Happy Hank's Honey House
>>>> Mt. Gilead, NC
>>>> ghankins at mac.com
>>>> 
>>>> 
>>>> ----------------------------------------------------------------------
>>>> 
>>>> The NewtonTalk Mailing List   http://newtontalk.net/
>>>> The Official Newton FAQ       http://splorp.com/newton/faq/
>>>> The Newton Glossary           http://splorp.com/newton/glossary/
>>> 
>>> ----------------------------------------------------------------------
>>> 
>>> The NewtonTalk Mailing List   http://newtontalk.net/
>>> The Official Newton FAQ       http://splorp.com/newton/faq/
>>> The Newton Glossary           http://splorp.com/newton/glossary/
>> ----------------------------------------------------------------------
>> 
>> The NewtonTalk Mailing List   http://newtontalk.net/
>> The Official Newton FAQ       http://splorp.com/newton/faq/
>> The Newton Glossary           http://splorp.com/newton/glossary/
> 
> ----------------------------------------------------------------------
> 
> The NewtonTalk Mailing List   http://newtontalk.net/
> The Official Newton FAQ       http://splorp.com/newton/faq/
> The Newton Glossary           http://splorp.com/newton/glossary/



More information about the NewtonTalk mailing list